Aeroseal for New Construction
The Aeroseal patented and award winning process is the most EFFECTIVE, most FAST, and most SIMPLE duct sealing solution available to meet all existing (and planned) codes the first time, every time in new construction applications. The Aeroseal process safely seals ductwork from the inside, allowing real-time certified and measurable results. The technology uses a non-toxic aerosol solution of micron-sized particles that are blown into the pressurized ductwork, seeks out leaks and seals them from the inside. Ducts can be hung in the rough-in stage and sealed using the Aeroseal system. Aeroseal boasts the most cutting-edge technological advancements in duct sealing. These technical innovations result in tremendous benefits for builders, contractors, and homeowners. Stop wasting time, money, and resources, while failing to meet codes and using outdated methods (mastic and tape) and switch to the next “BIG THING” in new construction. Fill out the Form for more info.
Eliminates the Need to Build w/ Wood or Metal Blocking
The Nailer is the only patented drywall fastener that hard fastens to both the stud and the drywall, eliminating the need to build with wood or metal blocking and significantly lowering lumber and metal framing costs. Drywall clips that pinch on to the drywall are awkward to use and can only be hard fastened to the framing, not the drywall. All too often these clips cause serious injuries with their sharp edges and claws. Since there is less wood to cut through for electrical and plumbing, the GC can also save on subcontractor costs. Installing and blocking a 2,000 sq. ft. space can be done in as little as 3 hours with 1 person. The Nailer also reduces costly callbacks due to Truss Uplift by allowing the truss to arch and move if it needs to without ripping out the corner joint from the wall.
Acme TC Cladding
Considerably Lighter than Traditional Masonry Construction
Acme TC Cladding terra cotta panels offer durability and low maintenance, while providing a sleek, contemporary appearance to a building's exterior. Compared with traditional masonry construction, TC Cladding is considerably lighter weight allowing for less onsite labor. Acme TC Cladding installs in all weather conditions using multiple methods, including the Fast Track Stone™ system. The Fast Track Stone system does not require a concrete footing to support the weight of the masonry, resulting in considerable savings. Standard panel sizes are 1.18”x16”x36” or 1.18”x16”x48” and can be cut at the job site with a wet-cut masonry saw. Acme TC Cladding terra cotta panels are manufactured to strict tolerances in an ISO9001-certified plant, ensuring trouble-free installation.
Maintenance-Free Underlayment for Exterior Deck Porcelain Tile Installations
TI-PROBOARD is a sustainable, durable and virtually maintenance-free underlayment for exterior deck porcelain tile installations. The underlayment panels are unaffected by expansion, contraction or exterior weather conditions. The 12" panels are available in lengths of 8' and 12' and can be cut to length with a wet saw. TI-PROBOARD panels are installed directly over joists 16" on-center without the need for deck boards or other support. Simply fasten the interlocking boards to the deck framing, fill the surface with a scratch coat and then lay porcelain tile with thinset adhesive. TI-ProBoard won’t warp or support the growth of mold, and is approved for commercial installations. Applications include decks, balconies, exterior floors, base for counter tops, outdoor kitchens, Three Seasons rooms, indoor kitchen floors, bathrooms, mud room floors and as a base for 3/4” concrete.